My Cart (0 )
-
45° Bends (21)
-
90° Bends (18)
-
Bending Reducers (55)
-
Flanges (11)
-
Hump Hose Couplers (19)
-
Silicone Reducers (81)
-
Straight Couplers (45)
-
T-Bolt Clamps (10)
-
V-band Clamps (16)
-
T67,T72,76,78 discharge flange and clamp
Rated 0 out of 5$ 38.00T67,T72,76 78 discharge flange and clamp -
-
T-Bolt Clamp for 3.0″ Silicone Parts
Rated 0 out of 5$ 2.81These Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling. Actual clamping ability is 3.11" to 3.43". These clamps are smooth on the inside and will not bite into silicone like worm gear clamps. Clamping ability is over 20 times greater than worm gear clamps. Bolt is easy to tighten since it is out away from the clamping surface. Clean, shiny, and professional looking - show quality clamps. Do not get dirty as easily as worm gear clamps, and are easier to clean. -
-
S400/GT42/GT45/GT55/PROMOD Compressor outlet V-band Assembly
Rated 0 out of 5$ 56.00This is the complete assembly with the oring. Material AL. -
s300 Inlet V-band for DV .86ar Housing
Rated 0 out of 5$ 45.00S300 Inlet flange and clamp in Stainless Steel 2.5" for inlet of turbo -
oil drain/feed setup for T3/T4 kit
Rated 0 out of 5$ 69.00Oil feed and drain setup for most turbos T3 T4 based includes all flanges and an fittings and lines -
T-Bolt Clamp for 2.5″ Silicone Parts
Rated 0 out of 5$ 2.81These Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling. Actual clamping ability is 2.60" to 2.91". These clamps are smooth on the inside and will not bite into silicone like worm gear clamps. Clamping ability is over 20 times greater than worm gear clamps. Bolt is easy to tighten since it is out away from the clamping surface. Clean, shiny, and professional looking - show quality clamps. Do not get dirty as easily as worm gear clamps, and are easier to clean. -
-
-
-
-
T-Bolt Clamp for 4.0″ Silicone Parts
Rated 0 out of 5$ 2.81These Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling. Actual clamping ability is 3.62" to 3.94". These clamps are smooth on the inside and will not bite into silicone like worm gear clamps. Clamping ability is over 20 times greater than worm gear clamps. Bolt is easy to tighten since it is out away from the clamping surface. Clean, shiny, and professional looking - show quality clamps. Do not get dirty as easily as worm gear clamps, and are easier to clean. -
Silicone Reducer, 4.0″ to 3.0″ – Black
Rated 0 out of 5$ 14.04Applications: Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet. Custom compressor, intercooler or inlet piping for turbo/supercharged car Custom cold air intake for nonturbo car Replacement of all factory rubber parts High quality 3-ply or 4-ply fabric reinforced silicone Installer can cut silicone parts down to fit with a razor Heat tolerance: -40° to 392° Fahrenheit Burst Pressure: 200 PSI Working Pressure: 50 PSI Wall Size: 4 mm - 5 mm -
T-Bolt Clamp for 3.5″ Silicone Parts
Rated 0 out of 5$ 2.81These Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling. Actual clamping ability is 3.62" to 3.94". These clamps are smooth on the inside and will not bite into silicone like worm gear clamps. Clamping ability is over 20 times greater than worm gear clamps. Bolt is easy to tighten since it is out away from the clamping surface. Clean, shiny, and professional looking - show quality clamps. Do not get dirty as easily as worm gear clamps, and are easier to clean. -
3.0″ Silicone 90° Elbow, Black
Rated 0 out of 5$ 19.79Applications: Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet. Custom compressor, intercooler or inlet piping for turbo/supercharged car Custom cold air intake for nonturbo car Replacement of all factory rubber parts High quality 3-ply or 4-ply fabric reinforced silicone Installer can cut silicone parts down to fit with a razor Heat tolerance: -40° to 392° Fahrenheit Burst Pressure: 200 PSI Working Pressure: 50 PSI Wall Size: 4 mm - 5 mm