My Cart (0 )
-
Oil Feed Flange 4an
$ 22.00 -
VSR 85/102 Billet T6 1.32 Race Cover V-band
Original price was: $ 1,099.00.$ 809.00Current price is: $ 809.00. -
Denmah Package with Billet 85mm T6 1.32ar
$ 1,470.00 – $ 1,520.00Base Denmah Package with the Billet 85mm T6 Upgrade 1 Billet 85mm T6 1.32ar Turbo 1 Discharge/Flange Clamp 5" clamp/flange 1 3" intercooler 31*12*3 1 44mm WG 1 50mm BOV 1 3" ic piping kit with couplers 1 oil drain and feed braided setup -
3.0″ Silicone 45° Elbow, Black
$ 18.3545 degree bend to build or finish your intake. Applications: Custom compressor, intercooler or inlet piping for turbo/supercharged car Custom cold air intake for nonturbo car Replacement of all factory rubber parts High quality 3-ply or 4-ply fabric reinforced silicone Installer can cut silicone parts down to fit with a razor Heat tolerance: -40° to 392° Fahrenheit Burst Pressure: 200 PSI Working Pressure: 50 PSI Wall Size: 4 mm - 5 mm -
T-Bolt Clamp for 2.0″ Silicone Parts
$ 2.81These Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling. Actual clamping ability is 2.13" to 2.44".These clamps are smooth on the inside and will not bite into silicone like worm gear clamps. Clamping ability is over 20 times greater than worm gear clamps. Bolt is easy to tighten since it is out away from the clamping surface. Clean, shiny, and professional looking - show quality clamps. Do not get dirty as easily as worm gear clamps, and are easier to clean.
-
Silicone Reducer, 90° bend – 4.0″ to 3.0″ – Black
$ 21.60Applications: Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet. Custom compressor, intercooler or inlet piping for turbo/supercharged car Custom cold air intake for nonturbo car Replacement of all factory rubber parts High quality 3-ply or 4-ply fabric reinforced silicone Installer can cut silicone parts down to fit with a razor Heat tolerance: -40° to 392° Fahrenheit Burst Pressure: 200 PSI Working Pressure: 50 PSI Wall Size: 4 mm - 5 mm -
T6 to T4 adapter flange
$ 72.00This is a T4 divided to T6 adapter flange used to mount a T6 turbocharger on a T4 divided flanged turbo header or exhaust. -
VSR 68/70 Billet Wheel *Oil-Less, Ball-Bearing,Journal
$ 679.00 – $ 1,195.00 -
2.5″ Silicone Straight Coupler, Black
$ 10.79This is a regular 3" long straight coupler for use with high pressure turbo, supercharger, or intercooler piping. Applications: Custom compressor, intercooler or inlet piping for turbo/supercharged car Custom cold air intake for nonturbo car Replacement for all factory rubber hoses High quality 3-ply or 4-ply fabric reinforced silicone Installer can cut silicone parts down to fit with a razor Heat tolerance: -40° to 392° Fahrenheit Burst Pressure: 200 PSI Working Pressure: 50 PSI Wall Size: 4 mm - 5 mm -
VSRacing S400 Turbine Housing 96×88 Turbine wheel fitment 1.25AR
$ 285.00This is the S400 Turbine housing that will fit the borg 96x88 turbine wheels. T4 1.25 AR these units will also fit our 480 and 488 models that are T6 based. -
S475 1.32ar T6 96mm Turbine
$ 749.00S400 Borg Warner S400 PERFORMANCE UPGRADE TURBO with 1.32 A/R exhaust. Great for bigger CUBE, higher horsepower engines The 75mm Extended tip wheel cam flow 98 lbs/min., enough to support 1000 HP -
-
Silicone Reducer, 3.75″ to 3.0″ – Black
$ 14.04Applications: Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet. Custom compressor, intercooler or inlet piping for turbo/supercharged car Custom cold air intake for nonturbo car Replacement of all factory rubber parts High quality 3-ply or 4-ply fabric reinforced silicone Installer can cut silicone parts down to fit with a razor Heat tolerance: -40° to 392° Fahrenheit Burst Pressure: 200 PSI Working Pressure: 50 PSI Wall Size: 4 mm - 5 mm -
Custom Gen1 7875 Billet T4 1.25 or T4 .96ar optioned unit (Limited Edition)
$ 399.00 – $ 419.00 -
VSR Gen2 66/73 Billet .86ar Dual v-band housing
Original price was: $ 649.00.$ 499.88Current price is: $ 499.88.
